SKU: PIN125010300

PHOENIX INVERTER 12/500

VICTRON PURE SINEWAVE INVERTER 12V 500VA • VE DIRECT 230

$252.00

In Stock


Description

Victron Phoenix pure sine wave inverters:

 

Inverters convert stored direct current(DC) power in your batteries into alternating power (AC) power, like the kind you get in your home, so you can run your electrical appliances wherever you are. There are two types of inverters pure sine wave and modified sine wave. Modified sine wave inverters are a more basic form of technology than pure sine wave inverters, they produce power which is perfectly adequate for powering simple electronics. Use modified sine wave inverters to provide power for your less sensitive appliances like phone chargers, heaters and air conditioners. Modified inverters are best suited for resistive loads which don't have a start up surge. 

Pure sine wave inverters use more sophisticated technology to protect even the most sensitive electronics. Pure sine wave inverters produce power which equals – or is better than – the power in your home. Appliances which may not function properly, or which may be permanently damaged, without pure, smooth power will be safe with pure sine inverters. Use these inverters for televisions, laptops, digital microwaves, fridges and other sensitive electronic equipment. Pure Sine inverters can power just about any AC appliance without risk of damage.

 

Features:

VE.Direct communication port:

The VE.Direct port can be connected to:

- A computer (VE.Direct to USB interface cable needed)

- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

- Low battery voltage alarm trip and reset levels

- Low battery voltage cut-off and restart levels

- Dynamic cut-off: load dependent cut-off level

- Output voltage 210 - 245V

- Frequency 50 Hz or 60 Hz

- ECO mode on/off and ECO mode sense level

Monitoring:

- In- and output voltage, % load and alarms

Proven reliability:

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power:

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode:

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off:

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

LED diagnosis:

Please see manual for a description.

To transfer the load to another AC source: the automatic transfer switch:

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

*Bluetooth dongle to be purchased separately

12 Volt Phoenix Inverter  

 

 

12/500

 

 

Cont. power at 25°C

 

 

500VA

 

 

Cont. power at 25°C / 40°C

 

 

400/350W

 

 

Peak power

 

 

900W

 

 

Output AC voltage / frequency (adjustable)

 

 

230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%

 

 

Input voltage range

 

 

9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V

 

 

DC low shut down (adjustable)

 

 

9,3 / 18,6 / 37,2V

 

 

DC low restart and alarm (adjustable)

 

 

10,9 / 21,8 / 43,6V

 

 

Battery charged detect (adjustable)

 

 

14,0 / 28,0 / 56,0V

 

 

Max. efficiency

 

 

90%

 

 

Zero-load power

 

 

6W

 

 

Default zero-load power in ECO mode

 

 

1

 

 

ECO mode stop and start power setting

 

 

Adjustable

 

 

Protection

 

 

a - f

 

 

Operating temperature range

 

 

-40 to +65°C (fan assisted cooling)Derate 1,25% per °C above40°C

 

 

Humidity (non-condensing)

 

 

max 95%

 

 

ENCLOSURE

 

 

Material & Colour

 

 

Steel chassis and plastic cover (blue Ral 5012)

 

 

Battery-connection

 

 

Screw terminals

 

 

Maximum cable cross-section

 

 

10 mm2 / AWG8

 

 

 Standard AC outlets

 

 

230V: Schuko (CEE 7/4), IEC-320 (male plug included)120V: Nema 5-15R

 

 

Protection category

 

 

IP 21

 

 

Weight

 

 

3.9kg

 

 

Dimensions (H x W x D)

 

 

86 x 172 x 275mm

 

 

ACCESSORIES

 

 

Remote on-off

 

 

Yes

 

 

Automatic transfer switch

 

 

Filax

 

 

STANDARDS

 

 

Safety

 

 

EN-IEC 60335-1 / EN-IEC 62109-1

 

 

EMC

 

 

EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3

 

 

Automotive Directive

 

 

ECE R10-4

 

 

 

 

Specifications

SKU PIN125010300
Brand Victron

Reviews

Be The First To Review This Product!

Help other Signature Spares users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


$174.00

SKU: PIN123750300

PHOENIX INVERTER 12/375

$575.00

SKU: PIN122120300

PHOENIX INVERTER 12/1200


More From This Category


$174.00

SKU: PIN123750300

PHOENIX INVERTER 12/375

$1,550.00

SKU: PIN122300000

PHOENIX INVERTER SMART 12/3000

$1,010.00

SKU: PIN122160000

PHOENIX INVERTER SMART 12/1600

$1,140.00

SKU: PIN122200000

PHOENIX INVERTER SMART 12/2000

$575.00

SKU: PIN122120300

PHOENIX INVERTER 12/1200